Flute
The flute is an important element in the manufacturing of taps. This especially for blind hole taps where chips have to be guided and cut on the backway of the tapping process. There are commercial software for the design of flutes which calculates the CNC form. TapPro provides the relevant data such as cutting angle, cutting length, flute number soul diameter, flute wide, Bridge wide etc…
See the calculated flute with TapPro for M 10.00 mm X 1.50 mm:
- M 10.00 mm X 1.50 mm
- Through hole
The flute is an important element in the manufacturing of taps. This especially for blind hole taps where chips have to be guided and cut on the backway of the tapping process. There are commercial software for the design of flutes which calculates the CNC form. TapPro provides the relevant data such as cutting angle, cutting length, flute number soul diameter, flute wide, Bridge wide etc…
See the calculated flute with TapPro for M 10.00 mm X 1.50 mm:
- M 10.00 mm X 1.50 mm
- Through hole
Calculation of M 10.00 mm X 1.50 mm straight flute
• Flute through hole
• Flute setting
Outside diameter
Flute cutting angle
Flute cutting length
Flute end angle
Flute wideness
Leer
Thread bridge wide
Leer
Soul diameter
Flute deepness
Flute setting
10.00 mm
2.00°
1.710 mm
-18.00°
6.270 mm
75°
3.940 mm
45°
5.500 mm
2.400 mm
0.180 mm
2°
Information
• All value in blue are proposed by the Genius
• All value in white are calculated by TapPro
• All values in gold are to be entered by the developer
Taps for excavators
Information
• All value in blue are proposed by the Genius
• All value in white are calculated by TapPro
• All values in gold are to be entered by the developer
• Overview of the calculation with TapPro
Flute typeXXXXXXXXX
Designation
Creator
Type
Group number
Article number
Drawing number
Date
Time
Thread
Thread type
Class
Thread blank diameter
Thread diameter
Hole type
Ø10.00 mm /Ø5.5 mm
Philippe Manigley
3000
Flute type C
350.10.15.1
3000.350.10.15.1
27.05.2021
10:18:37
Coarse type
M
Class53
10.30 mm
10.00 mm
Th-hole
FluteXXXXXXXXX
Flute number
Soul diameter
Flute cutting angle
Flute cutting length
Right/left
Setting chip angle
Flute wideness
Leer
Thread bridge width
Leer
Flute width
Flute deepness
Flute end angle
Thread length
Flute length
Leer
Leer
3
5.50 mm
2.00°
1.71 mm
RH
0.18 mm
75.00°/75° 0″ 0′
6.27 mm
45.00°/45° 0″ 0′
3.94 mm
7.90 mm
2.40 mm
-18.00°/-18° 0″ 0′
24.00 mm
35.00 mm
• Overview of the calculation
Flute type
Designation: Ø10.00 mm /Ø5.5 mm
Creator: Philippe Manigley
Type: 3000
Group number: Flute type C
Article number: 350.10.15.1
Drawing number: 3000.350.10.15.1
Date: 27.05.2021
Time: 10:18:37
Thread: Coarse type
Thread type: M
Class: Class53
Thread blank diameter: 10.30 mm
Thread diameter: 10.00 mm
Hole type: Th-hole
Flute
Flute number:Â 3
Soul diameter: 5.50 mm
Flute cutting angle: 2.00°
Flute cutting length: 1.71 mm
Right/left: RH
Setting chip angle: 0.18 mm
Flute wideness: 75.00°/75° 0″ 0′
xxxXXXXXXXXX6.27 mm
Thread bridge width: 45.00°/45° 0″ 0′
XXXXXXXXXXXXXXX3.94 mm
Flute width: 7.90 mm
Flute deepness: 2.40 mm
Flute end angle: -18.00°/-18° 0″ 0′
Thread length: 24.00 mm
Flute length: 35.00 mm
Leer
• All value in blue are proposed by the Genius
• All value in white are calculated by TapPro
• All values in gold are to be entered by the developer