Developing taps for professionals
Developing new taps is a very long process. It begins with the blanks which are normed, then finding all the dimensions to create blanks from 1.00 mm up to 62 mm for through and blind holes, looking for all the tolerances and developing the blank form, all this needs a lot of time. With TapPro you can do it in minutes. It gives you all measures you request to build up your range.
• Blank DIN 376
• Spiral Point
To develop a new geometry without background knowledge is a long way. You start with the first series and you will soon see that you have to adjust your parameter. At this stage you will not know where you have to make the adaptation according to the application you are build up. TapPro helps you with the Genius all the way on. You will find the support to adapt your geometry on the troubleshooting area of the software. The geometry is the most complicate part of the tap. You need geometries for steel with a low and hight expansion coefficient [ 10 % to 60 % ] as well as for low or high strength materials [ 600 N/mm² up to 1’500 N/mm² ]. TapPro gives you geometries values for 15 different material classes. For standard taps as well as for high performance taps. The software calculates you the chamfer.
• Outside Diameter
Calculation of the diameters…
• Relief of the thread
A correct functionality of the tap can be determined with a well adapted geometry according to the cutting material. The thread geometry is the heard of the tap. With a well adapted geometry the taps are working properly and are able to bring a high tool live. TapPro with the Genius gives you all needed key data to reach this target.
• Back tape in the thread
Back tape…
• Chamfer
Chamfer…
• Relief in chamfer
Relief in chamfer…
• Flute
You will find all the requested value to create your own tap ranges with the TapPro software.
You will find all the requested value to create your own tap ranges with the TapPro software.
Developing taps for professionals
Developing new taps is a very long process. It begins with the blanks which are normed, then finding all the dimensions to create blanks from 1.00 mm up to 62 mm for through and blind holes, looking for all the tolerances and developing the blank form, all this needs a lot of time. With TapPro you can do it in minutes. It gives you all measures you request to build up your range.
To develop a new geometry without background knowledge is a long way. You start with the first series and you will soon see that you have to adjust your parameter. At this stage you will not know where you have to make the adaptation according to the application you are build up. TapPro helps you with the Genius all the way on. You will find the support to adapt your geometry on the troubleshooting area of the software. The geometry is the most complicate part of the tap. You need geometries for steel with a low and hight expansion coefficient [ 10 % to 60 % ] as well as for low or high strength materials [ 600 N/mm² up to 1’500 N/mm² ]. TapPro gives you geometries values for 15 different material classes. For standard taps as well as for high performance taps. The software calculates you the chamfer.
For the flute TapPro with the Genius provides the relevant data such as cutting angle, cutting length, flute number, soul diameter, flute wide, bridge wide etc…
AÂ correct functionality of the tap can be determined with a well adapted geometry according to the cutting material. The thread geometry is the heard of the tap. With a well adapted geometry the taps are working properly and are able to bring a high tool live. TapPro with the Genius gives you all needed key data to reach this target.
Leer
Calculation of the diameters…
Division relief of the thread…
Thread relief…
Back tape…
Chamfer…
Relief in chamfer
You will find all the requested value to create your own tap ranges with the TapPro software.