Blanks

The tapping blanks are normed. The thread diameter the shank diameter as well as the thread length and the total length. TapPro have almost 30 standard blanks from 1 mm up to 62 mm with the dimension according to the DIN and JIS norm. The software gives you also a proposal of the tolerances of the body. Within a few seconds you are able to let TapPro calculate the blank of your choice.
See the calculated blank with TapPro
for M 10.00 mm X 1.50 mm:

M 10.00 mm X 1.50 mm
DIN 371
Through hole
HSSE-PM

Calculation of M 10.00 mm X 1.50 mm blank

• Blanks through holes

• Blanks blind holes

• Ø 10 DIN 371 th-hole

• Facet thread end

• Shank facet

• Mark

• Centre square

• Small point front

• Small point back

• Create facet

• Hole types

15 blanks for through holes

14 blanks for blind holes

Blank centerless

Facet thread end angle
Facet thread length

Shank facet angle
Shank facet length

Shank facet end angle
Square length
Square mark length

Square width
Turning square diameter
Turning facet square width

Leer
Leer

Front angle point
Thread blank diameter
Front short point length
Front short point diameter

Back angle point
Back short point diameter
Back short point length

Pitch
Chamfer pitch
Large facet chamfer diameter
Small facet chamfer diameter
Facet width P/2
Facet length
Facet flank angle
Manufacture essential facet edge
Thread blank diameter

Hole type

Ø 1 mm to Ø 62 mm

M 10 mm DIN 371 through hol

45°
2.13 mm

27°
2.21 mm

45°
11.00 mm
12.50 mm

8.00 mm
10.30 mm
1.01 mm

90°
12.30 mm
3.00 mm
6.00 mm

90°
3.00 mm
6.00 mm

1.50 mm
4.0
8.68 mm
7.18 mm
0.75 mm
6.00 mm
7.125°
1.56 mm
12.30 mm

Through hole 1 X diameter
Through hole 2 X diameter
Through hole 3 X diameter

Information

• All value in blue are proposed by the Genius
• All value in white are calculated by TapPro
• All values in gold are to be entered by the developer

Taps for engines

Taps for automotive patrs

Taps for electricity windmills

Taps for gas tourbines

Taps for general mecanic

Taps for antique locomotives

Taps for cable cars

Information

• All value in blue are proposed by the Genius
• All value in white are calculated by TapPro
• All values in gold are to be entered by the developer

• Overview of the calculation with TapPro

Blank typeXXXXXXXXXX
Designation
Creator
Type
Group number
Article number
Drawing number
Date
Time
Thread type
Hole type
Thread diameter
Pitch max.
Thread blank diameter
Thread length
Leer
Front pointXXXXXXXXXX
Front angle point
Front short point diameter
Front short point length
Leer
Thread facetXXXXXXXXXX
Facet thread end angle
Facet thread length
Leer

M Ø 10.30 mm DIN 371
Philippe Manigley
3000
3000.10 DIN 371 PM
150.10.15.1
1000.150.10.15.1
27.05.2021
09:15:25
M
Th-hole
10.00 mm
1.50 mm
10.30 mm +0/-0.05
24 mm +0/-0.5
Leer
Leer
90°
3 mm
6 mm
Leer
Leer
45°
2.13

ShankXXXXXXXXXXXXXXXXXXX
Shank diameter
Shank diameter blank
Shank facet angle
Shank facet length
Shank length without square
Shank length incl. square
Shank facet end angle
Leer
DegagementXXXXXXXXXXXXXXX
Degagement diameter
Degagement length
Leer
LengthXXXXXXXXXXXXXXXXXXX
Length from point to shanks
Length from chamfer to shanks
Leer
SquareXXXXXXXXXXXXXXXXXXX
Square length
Square turning length
Square width
Square mark length
Turning square diameter
Turning facet square width

Leer
10.00 mm
10.30 mm
27°
2.21 mm
45.79 mm +0/-0.5
106 mm +/-0.5
45°

Leer
8.05 mm +0/-0.05
15 mm +0/-0.5
Leer
Leer
42.00 mm +0/-0.5
39.00 mm +0/0.1
Leer
Leer
11.00 mm +0/-0.5
13.00 mm +/-0.5
8.00 mm H11
12.50 mm +0/-0.5
10.30 mm h6
1.01

Back pointXXXXXXXXXXXXXXXXX
Back angle point
Back short point diameter
Back short point length
Leer
FacetXXXXXXXXXXXXXXXXXXXX
Pitch
Chamfer pitch
Large facet chamfer diameter
Small facet chamfer diameter
Facet width P/2
Facet length
Facet flank angle
Manufacture essential facet edge
Leer
Hole typeXXXXXXXXXXXXXXXXX
Hole type
Leer
Leer
Leer
MaterialXXXXXXXXXXXXXXXXXX
Cutting material
Hardening process
Cutting steel hardness

Leer
90°
6.00 mm
3 mm
Leer
Leer
1.50 mm
4
8.68 mm +0/-0.2
7.18 mm +0/-0.2
0.75 mm
6.00 mm +0/-0.5
7.125°
1.56 mm +0/-0.5
Leer
Leer
Through hole 1 X diameter
Through hole 2 X diameter
Through hole 3 X diameter
Leer
Leer
HSSE-PM
Vacuum
HRc 66

• Overview of a calculation

Blank type

Designation: M Ø 10.30 mm DIN 371
Creator: Philippe Manigley
Type: 3000
Group number: 3000.10 DIN 371 PM
Article number: 150.10.15.1
Drawing number: 1000.150.10.15.1
Date: 27.05.2021:
Time: 09:15:25
Thread type: M
Hole type: Th-hole
Thread diameter: 10.00 mm
Pitch max.: 1.50 mm
Thread blank diameter: 10.30 mm +0/-0.05
Thread length: 24 mm +0/-0.5
Leer
Front point
Front angle point: 90°
Front short point diameter: 3 mm
Front short point length: 6 mm
Leer
Thread facet
Facet thread end angle: 45°
Facet thread length: 1.13

Shank
Shank diameter: 10.00 mm
Shank diameter blank: 10.30 mm
Shank facet angle: 27°
Shank facet length: 2.21 mm
Shank length without square: 45.79 mm +0/-0.5
Shank length incl. square: 106 mm +/-0.5
Shank facet end angle: 45°
Leer
Degagement
Degagement diameter: 8.05 mm +0/-0.05
Degagement length: 15 mm +0/-0.5
Leer
Length
Length from point to shanks: 42.00 mm +0/-0.5
Length from chamfer to shanks: 39.00 mm +0/0.1
Leer
Square
Square length: 11.00 mm +0/-0.5
Square turning length: 13.00 mm +/-0.5
Square width: 8.00 mm H11
Square mark length: 12.50 mm +0/-0.5
Turning square diameter: 10.30 mm h6
Turning facet square width: 1.01

Back point
Back angle point: 90°
Back short point diameter: 6.00 mm
Back short point length: 3 mm
Leer
Facet
Pitch: 1.50 mm
Chamfer pitch: 4
Large facet chamfer diameter: 8.68 mm +0/-0.2
Small facet chamfer diameter: 7.18 mm +0/-0.2
Facet width P/2: 0.75 mm
Facet length: 6.00 mm +0/-0.5
Facet flank angle: 7.125°
Manufacture essential facet edge: 1.56 mm
Leer
Hole type
Through hole 1 X diameter
Through hole 2 X diameter
Through hole 3 X diameter
Leer
Material
Cutting material: HSSE-PM
Hardening process: Vacuum
Cutting steel hardness: HRc 66
Leer

• All value in blue are proposed by the Genius
• All value in white are calculated by TapPro
• All values in gold are to be entered by the developer